| Author |
Message |
    
randem
Moderator
Username: randem
Post Number: 1000
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, August 31, 2008 - 10:28 pm: | 
|
You are welcome. Glad things are working well. |
sacramento
Junior Member
Username: sacramento
Post Number: 57
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, August 31, 2008 - 10:26 pm: |
|
Hi Randem:
Everything work fine in Vista an XP(Just today a had opportunity to complete the tests)...tests are ended for this problem...
Thanks a lot |
randem
Moderator
Username: randem
Post Number: 992
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, August 25, 2008 - 12:42 am: |
|
No, Thank you!!!
I can not rest till all things wrong are right (well with InnoScript anyways...) 
Time for sleep... |
sacramento
Junior Member
Username: sacramento
Post Number: 56
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, August 25, 2008 - 12:40 am: |
|
Finnaly,the problem as gone!!
Very well Randem...nice job!
Now I'm must test this in the PC I had tell you,to see if everything is ok!
Later I post the result ok?
Thanks a lot for your patience
|
randem
Moderator
Username: randem
Post Number: 991
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, August 25, 2008 - 12:34 am: |
|
Slight Oversight
|
sacramento
Junior Member
Username: sacramento
Post Number: 55
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, August 25, 2008 - 12:26 am: |
|
Lower Case: b.5 |
randem
Moderator
Username: randem
Post Number: 990
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, August 25, 2008 - 12:24 am: |
|
Ok, now when you looked into InnoScript View->Registered Components was the "b" lower case or Upper case? |
sacramento
Junior Member
Username: sacramento
Post Number: 54
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, August 25, 2008 - 12:24 am: |
|
Maybe the problem it's not concerning with the country version no? |
sacramento
Junior Member
Username: sacramento
Post Number: 53
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, August 25, 2008 - 12:22 am: |
|
In fact,this is not easy
|
randem
Moderator
Username: randem
Post Number: 989
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, August 25, 2008 - 12:17 am: |
|
Ok, this should do it.
Thanks for your patience and assistance.
|
sacramento
Junior Member
Username: sacramento
Post Number: 51
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, August 25, 2008 - 12:13 am: |
|
value:
-0,5 |
randem
Moderator
Username: randem
Post Number: 987
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, August 25, 2008 - 12:08 am: |
|
OK, getting closer. It's the country formatting
Try
Int(Val("11.5")) - Val("11.5") |
sacramento
New member
Username: sacramento
Post Number: 49
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, August 25, 2008 - 12:05 am: |
|
Values:
115
11,5 |
randem
Moderator
Username: randem
Post Number: 986
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, August 25, 2008 - 12:03 am: |
|
I have no idea of what that version is doing...
Try this:
? CDbl("11.5")
? Val("11.5") |
sacramento
New member
Username: sacramento
Post Number: 48
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, August 25, 2008 - 12:00 am: |
|
Values returned:
68
FFFFFF98 |
randem
Moderator
Username: randem
Post Number: 985
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, August 24, 2008 - 11:56 pm: |
|
Ooopps, Sorry...
Try this in the IDE
? Hex(Abs(Int(Val("11.5")) - CDbl("11.5")))
then
? Hex(Abs(Int(Val("11.5"))) - CDbl("11.5")) |
sacramento
New member
Username: sacramento
Post Number: 47
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, August 24, 2008 - 11:52 pm: |
|
The version Windows is in Portuguese language,not in Spanish! |
sacramento
New member
Username: sacramento
Post Number: 46
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, August 24, 2008 - 11:50 pm: |
|
the script
|
randem
Moderator
Username: randem
Post Number: 984
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, August 24, 2008 - 11:46 pm: |
|
Ok, got it. You have a Spanish version of Windows (or at least the code page) and it does something strange in that conversion.
|
sacramento
New member
Username: sacramento
Post Number: 45
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, August 24, 2008 - 11:42 pm: |
|
the value is "b" |
randem
Moderator
Username: randem
Post Number: 983
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, August 24, 2008 - 11:39 pm: |
|
Ok, that is where the problem is. Try this:
? LCase(Hex(Int(Val("11.5")))) |
sacramento
New member
Username: sacramento
Post Number: 44
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, August 24, 2008 - 11:38 pm: |
|
Hi:
The value returned is 73 |
randem
Moderator
Username: randem
Post Number: 982
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, August 24, 2008 - 10:21 pm: |
|
Try this for me. In the VB IDE place a break point in your application just to run this statement. In the immediate window type
? LCase(Hex(Val(Int("11.5"))))
Then let me know what gets shown. |
sacramento
New member
Username: sacramento
Post Number: 43
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, August 24, 2008 - 08:49 pm: |
|
Hi:
The results...YOu can try with CR10...I had make the test with CR10 and the problem remain.
Thanks
|
randem
Moderator
Username: randem
Post Number: 981
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, August 24, 2008 - 01:38 pm: |
|
I cannot reproduce your issue here. I am attaching the script I generated from your vbp file and another exe. Replace the one you have with this one and re-run InnoScript. Post the results.
I get the error because I don't have CR 11 loaded but the output of that line is different for me.
|
sacramento
New member
Username: sacramento
Post Number: 42
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, August 24, 2008 - 11:14 am: |
|
Hi Randem:
See if is the attached file
|
randem
Moderator
Username: randem
Post Number: 980
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, August 23, 2008 - 09:47 pm: |
|
That's not the vbp file. The Visual Basic Project File. The one you open to code in VB... |
sacramento
New member
Username: sacramento
Post Number: 41
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, August 23, 2008 - 09:43 pm: |
|
Hi Randem:
Sory the delay...today i'm out all day too,but i leave here the .vbp file ok?
THanks
|
randem
Moderator
Username: randem
Post Number: 979
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, August 23, 2008 - 11:40 am: |
|
Where is the .vbp file? I need to see the contents for I believe the problem is there. |
randem
Moderator
Username: randem
Post Number: 978
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, August 23, 2008 - 02:27 am: |
|
Can't find anything without that .vbp file.
I will go to sleep now, it's 2:27am... |
sacramento
New member
Username: sacramento
Post Number: 40
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, August 23, 2008 - 02:24 am: |
|
Randem,I Need to leave now for a few hours...
If you find something please post ok?
Thanks for your help |
randem
Moderator
Username: randem
Post Number: 977
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, August 23, 2008 - 02:24 am: |
|
Ok, Open your .vbp file in notepad and post the contents. |
sacramento
New member
Username: sacramento
Post Number: 39
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, August 23, 2008 - 02:18 am: |
|
version B.5 |
randem
Moderator
Username: randem
Post Number: 976
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, August 23, 2008 - 02:16 am: |
|
Use the Registered files viewer in InnoScript to see what the version number is on the crviewer.dll file.
View->Registered Components |
sacramento
New member
Username: sacramento
Post Number: 38
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, August 23, 2008 - 02:13 am: |
|
I had installed the last adjustment
I think the problem remain
|
randem
Moderator
Username: randem
Post Number: 975
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, August 23, 2008 - 02:06 am: |
|
I had to make an adjustment
|
randem
Moderator
Username: randem
Post Number: 974
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, August 23, 2008 - 01:49 am: |
|
Try this one. I forgot about the country formatting...
|
randem
Moderator
Username: randem
Post Number: 973
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, August 23, 2008 - 01:35 am: |
|
You have a strange entry for crviewer.dll
; Unknown Component (Possibly not registered) - CRViewer.dll - 73,0 - (CRViewer.dll)
It's the 73,0 that is the issue. I believe I know what it is. Give me a few moments. |
sacramento
New member
Username: sacramento
Post Number: 37
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, August 23, 2008 - 01:28 am: |
|
New version of innoscript are installed...
I think the problem remain...
|
randem
Moderator
Username: randem
Post Number: 972
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, August 23, 2008 - 01:28 am: |
|
Your script is still the old version... |
randem
Moderator
Username: randem
Post Number: 971
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, August 23, 2008 - 01:13 am: |
|
What????
The update is on the site. |
sacramento
New member
Username: sacramento
Post Number: 36
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, August 23, 2008 - 01:12 am: |
|
This update you are upload where he is? |
sacramento
New member
Username: sacramento
Post Number: 35
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, August 23, 2008 - 01:11 am: |
|
Hi Randem:
Regist are made in Crviewer.ddl and a new sricpt are run,but the script remain with the same message...
I had attached the script
|
randem
Moderator
Username: randem
Post Number: 970
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, August 23, 2008 - 12:10 am: |
|
I just uploaded an update that takes care of the crviewer.dll problem. |
randem
Moderator
Username: randem
Post Number: 969
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, August 22, 2008 - 11:07 pm: |
|
cd \foldername
if the name contains spaces you may have to place it in quotes
cd "\folder" |
sacramento
New member
Username: sacramento
Post Number: 34
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, August 22, 2008 - 11:03 pm: |
|
sory...do you remember the command in DOS to go to a folder? |
randem
Moderator
Username: randem
Post Number: 968
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, August 22, 2008 - 10:58 pm: |
|
You will need to change to be inside the C:\Programas\Business Objects\Common\3.5\crystalreportviewers115\ActiveXControls\ folder then execute the regsvr32 command. This is all at the DOS prompt. |
sacramento
New member
Username: sacramento
Post Number: 33
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, August 22, 2008 - 10:55 pm: |
|
Sory!!!the syntax to regist are not correct? |
randem
Moderator
Username: randem
Post Number: 967
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, August 22, 2008 - 10:32 pm: |
|
You have to be in the same folder as the component to register it. |
sacramento
New member
Username: sacramento
Post Number: 32
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, August 22, 2008 - 10:29 pm: |
|
Hi:
I try regist the component manually but i can't i don't know why:
regsvr32.exe C:\Programas\Business Objects\Common\3.5\crystalreportviewers115\ActiveXControls\crviewer.dll
the error returned by windows:
Loadlibrary("C:\Programas\Business")as fail.Impossible locate the specified module...
This is very strange...The path are correct...
If I copy/paste the component to C:\CRviewer.dll i can regist,but in the standard path no!!!
If i copy/paste this component again to the standard path after regist in C: the regist are valid? |
randem
Moderator
Username: randem
Post Number: 966
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, August 22, 2008 - 09:30 pm: |
|
Ok, I am researching this it might be our problem... I will have an answer either way by time you get back. |
sacramento
New member
Username: sacramento
Post Number: 31
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, August 22, 2008 - 09:29 pm: |
|
ok...Let's try and then I return ok...
I must do this in annother PC that is a 15Km far way from me...
Thanks |
randem
Moderator
Username: randem
Post Number: 965
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, August 22, 2008 - 09:16 pm: |
|
Here is your problem directly in the script...
; Unknown Component (Possibly not registered) - CRViewer.dll - 78, - (CRViewer.dll)
This file is not properly registered on your machine so it is never deployed.
Unregister it and re-register it. This message must go away before it will be deployed. |
sacramento
New member
Username: sacramento
Post Number: 30
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, August 22, 2008 - 09:11 pm: |
|
This is the script...
The install.log file i had ask a friend that had install the program to send me the file...
This file in my PC are not fiable!
|
randem
Moderator
Username: randem
Post Number: 964
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, August 22, 2008 - 09:07 pm: |
|
I see that CRViewer.dll isn't even deployed so it must not be in your script. That would cause it not to be registered. |
randem
Moderator
Username: randem
Post Number: 963
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, August 22, 2008 - 09:03 pm: |
|
As always... Let's see that script.
And the current Install.log from the {app} folder. |
sacramento
New member
Username: sacramento
Post Number: 29
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, August 22, 2008 - 09:00 pm: |
|
Well...this is bad...what is wrong???
Do you have some idea?? |
randem
Moderator
Username: randem
Post Number: 962
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, August 22, 2008 - 08:57 pm: |
|
Ok, everything look good and the install.log file you showed before stated that the dll was registered. Here is an install.log that shows where registration has failed on one item.
|
sacramento
New member
Username: sacramento
Post Number: 28
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, August 22, 2008 - 08:45 pm: |
|
Sory...this is the most recent
setup |
sacramento
New member
Username: sacramento
Post Number: 27
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, August 22, 2008 - 08:38 pm: |
|
Hi Randem:
Sory the delay off the answear...I had 3 days Out..
The File are attached...
Thanks for your help
|
randem
Moderator
Username: randem
Post Number: 961
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, August 22, 2008 - 11:39 am: |
|
So what is the status? |
randem
Moderator
Username: randem
Post Number: 960
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, August 20, 2008 - 06:50 pm: |
|
this is what the log should look like
You probably looked at the Install.log and I never asked for that one. |
randem
Moderator
Username: randem
Post Number: 959
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, August 20, 2008 - 06:46 pm: |
|
It can't be. There were things that happened before that happened. Did you install under the same user? Run the installation and check again. There will be another log with the current date and a higher number for the log. |
sacramento
New member
Username: sacramento
Post Number: 26
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, August 20, 2008 - 02:25 pm: |
|
Sory...that's the Whole Log |
randem
Moderator
Username: randem
Post Number: 958
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, August 20, 2008 - 01:55 pm: |
|
The whole log would help... |
sacramento
New member
Username: sacramento
Post Number: 25
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, August 20, 2008 - 01:53 pm: |
|
This is that i have in the log:
Registering craxdrt.dll
{91FDA5AF-C945-4DDC-8C32-29A790CF16F0}\b.5
C:\Programas\Business Objects\Common\3.5\bin\craxdrt.dll
************************************************* |
randem
Moderator
Username: randem
Post Number: 957
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, August 20, 2008 - 09:24 am: |
|
Check your installation log in the installation users temp folder for a file named Setup Log followed by the date and then a number. This will tell you what happened during installation.
Did you allow your app to copy your data into the users data area? |
sacramento
New member
Username: sacramento
Post Number: 24
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, August 20, 2008 - 01:04 am: |
|
Hi Randem:
I had change a few thinks in my code and i had installed in a Clean System with Vista...The program work well,but when i call the report I got this error:
Run time error:
Component "CRViewer.dll" or one of it's dependencies not correctly registered:a file is missing or invalid
Innosetup don't regist this component in the installation?Or this is something else?
Thanks |
sacramento
New member
Username: sacramento
Post Number: 17
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, August 17, 2008 - 10:18 pm: |
|
Ok...I will chance my code in VB and then try this metthod...
Thanks |
randem
Moderator
Username: randem
Post Number: 949
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, August 17, 2008 - 10:12 pm: |
|
Yes, that is the way things should have been coded since NT 4.0. Coders were very lax in doing this and it will cost them in the move to Vista. It is for the users and application protection. |
sacramento
New member
Username: sacramento
Post Number: 15
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, August 17, 2008 - 10:08 pm: |
|
This is very strange in Vista...I can not use my reports,and mdb's, in my folder?I need to remove them for C:\Documents and Settings\TheUsersName\Local Settings\Application Data\YourCompanyName\YourProductName
Off course this is metthod is compatible with XP no? |
randem
Moderator
Username: randem
Post Number: 947
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, August 17, 2008 - 09:58 pm: |
|
You need to reconstruct where you will be placing your data files. Vista just enforces this. The method has been around since NT 4. You need to use the {localappdata} or C:\Documents and Settings\TheUsersName\Local Settings\Application Data\YourCompanyName\YourProductName. You can also use the All Users location also if this database is to be share between multiple users on the same computer.
You can install the mdb in the {app} folder but on application startup it should be copied to the proper location. |
sacramento
New member
Username: sacramento
Post Number: 13
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, August 17, 2008 - 09:52 pm: |
|
Hi:
Yes the CR installation happen!but when I start the program and try to see an Report I got a error!
Because I cannot place the rpt in files that's I have this problem...Where I put the rpt? |
randem
Moderator
Username: randem
Post Number: 946
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, August 17, 2008 - 09:46 pm: |
|
You will most likely have to turn off UAC to install it then turn UAC back on also. |
randem
Moderator
Username: randem
Post Number: 944
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, August 17, 2008 - 09:29 pm: |
|
Please elaborate "I don't have CR installed". Does the CR installation happen?
Installation on Vista is a different animal have you read Installing on Vista
You cannot place the mdb in the {app} folder and possibly the .rpt files either. |
sacramento
New member
Username: sacramento
Post Number: 12
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, August 17, 2008 - 09:25 pm: |
|
Hi:
This section it's Wrong!!(just a tried to resolve the problem)But randem,in this case if I put this two files in the section FIles,I have a error in Vista in CR!
What I can do for resolve this?Because if I remove this files the program don't return errors,but removing this files I don't have the CR installed! |
randem
Moderator
Username: randem
Post Number: 943
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, August 17, 2008 - 05:41 pm: |
|
Questions unanswered? Where did the section [APPDATA] come from??? |
sacramento
New member
Username: sacramento
Post Number: 9
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, August 17, 2008 - 11:08 am: |
|
This is the script
Thanks
|
randem
Moderator
Username: randem
Post Number: 939
Registered: 04-2004
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, August 17, 2008 - 09:29 am: |
|
Is this an InnoScript question or Inno Setup?
There is no such [APPDATA] section in Inno Setup so I don't see how your script even compiled and InnoScript does not place such a section in the script. Those lines of code are to be in the [Files] Section. Post your script. |
sacramento
New member
Username: sacramento
Post Number: 7
Registered: 03-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, August 17, 2008 - 08:58 am: |
|
Hi to all:
I have this line in the Appdata folder,in my innosetup, because i want install my project in Vista:
[APPDATA]
Source: e:\projectos vb\winbirds profissional\bd vazia para wbp\progaves.mdb; DestDir: {app}; Flags: ignoreversion;
Source: e:\projectos vb\winbirds profissional\winbirds profissional\ficha_individual.rpt; DestDir: {app}; Flags: ignoreversion;
But innosetup don't install this files in the appropriate folder...
Something wrong in the code?
Thanks |
InnoScript - General Questions, Report Bugs, Problems etc... 
Fix